Tools
How Much Clay for a Mug? Pottery Clay Weight Calculator
A mug that holds about 350 mL (12 US fl oz) when finished takes about 635 g (1.4 lb) of clay, assuming 6 mm walls, a 7 mm floor, 12% shrinkage, and 25% extra for trimming.
Pick a pot, adjust the finished size, and see how much it will hold, how big to throw it, and how much clay to weigh out.
Results
Holds, finished
353 mL
12.0 US fl oz · 406 mL to the brim
Clay to weigh out
635 g
1 lb 6 oz · 508 g ends up in the pot
Throw it this size (wet)
- Rim
- 99 mm
- Base
- 99 mm
- Height
- 113 mm
- Wall
- 7 mm
The pot loses about 32% of its volume between throwing and firing.
Clay weight chart
Each row is one of the calculator’s presets with the default settings: 12% shrinkage, wet clay at 1.9 g/cm³, and 25% extra for trimming. Sizes are finished, after firing. Handles are not included.
| Pot | Rim × height | Walls | Clay to weigh out | Pounds |
|---|---|---|---|---|
| Mug | 87 × 99 mm | 6 mm | 635 g | 1.4 lb |
| Cup | 89 × 70 mm | 5 mm | 347 g | 0.8 lb |
| Small bowl | 134 × 67 mm | 6 mm | 562 g | 1.2 lb |
| Dinner plate | 229 × 22 mm | 7 mm | 1,011 g | 2.2 lb |
| Vase | 86 × 125 mm | 6 mm | 800 g | 1.8 lb |
How much clay for a bowl?
About 562 g (1.2 lb) for the small bowl preset, 134 mm across and 67 mm tall when finished. That is inside the 1 to 1.5 lb range that Colorado State University Extension’s 4-H wheel-throwing unit gives for a first bowl. The calculator treats a bowl as straight-sided, so a rounder bowl holds a little more than it says.
How much clay is lost to trimming?
The calculator adds 25% to the clay that ends up in the pot. For the mug, that is 508 g in the pot and 635 g to weigh out, so about 127 g covers trimming and a thicker beginner floor. The 25% is our own starting guess, not a published figure. Lower it as your pots get lighter.
Does it change for handbuilding?
The presets are simple wheel-thrown shapes. The clay in the pot depends only on its size and wall thickness, so a handbuilt pot with the same walls needs the same amount. The 25% extra is mostly for trimming, so lower it if you won’t trim. Not sure which to try? See handbuilding vs the wheel.
Measurement standards and pottery sizes are different things
A “cup” on a measuring jug is a defined unit. A cup you throw can be any size you like. The calculator keeps them apart.
Measurement standards
These are fixed definitions. Use them when someone asks for, say, “a pint jug.”
| Unit | Millilitres | Source |
|---|---|---|
| US fluid ounce | 29.573 | NIST |
| US measuring cup (8 US fl oz) | 237 | NIST |
| US nutrition-label cup | 240 | FDA |
| US liquid pint | 473.18 | NIST |
| Imperial (UK) fluid ounce | 28.412 | NIST |
| Imperial pint (20 imperial fl oz) | 568.24 | NIST |
The imperial pint is worked out from NIST’s imperial fluid ounce (20 × 28.412 mL).
Suggested pottery sizes
These are the starting points behind each button above. They are common sizes, not rules. Change anything.
| Pot | What the preset aims for |
|---|---|
| Espresso cup | About 60 mL, the espresso cup size in Nescafé’s cup guide. Source |
| Cup | About 180 mL, the cappuccino cup size in Nescafé’s cup guide. Source |
| Mug | About 350 mL, the standard mug size in Nescafé’s cup guide. Source |
| Small bowl | A first bowl from 1 to 1.5 lb (450–680 g) of clay, the amount Colorado State University Extension’s 4-H wheel-throwing unit starts with. Source |
| Dinner plate | A 9-inch (229 mm) finished plate, the dinner plate size the NYC Health Department recommends for a balanced meal. Source |
| Jug | Holds one US pint (473 mL), made from 1.5 to 2 lb (680–910 g) of clay, Colorado State University Extension’s range for a pitcher. Source |
| Vase | A first vase from 1.5 to 2 lb (680–910 g) of clay, Colorado State University Extension’s range for a vase. Source |
How the numbers are worked out
- Shape. The pot is treated as straight-sided, like a cylinder or a cone with the tip cut off. Curved bowls and round-bellied jugs hold a little more than this says. Handles, spouts, and lids are not included, so add clay for those.
- Capacity is the inside volume from the floor up to your fill line.
- Throwing size is the finished size divided by (1 − shrinkage). For 12% shrinkage, a 100 mm finished rim is thrown at 113.6 mm, not 112 mm. Our shrinkage notes explain why.
- Clay weight is the volume of the walls and floor, scaled up to its wet size, times the density of your wet clay, plus the trimming allowance.
About the density and trimming guesses
We could not find a published density for wet throwing clay that we trust, so 1.9 g/cm³ is an assumption. With it, the bowl, jug, and vase presets need amounts of clay inside the ranges Colorado State University Extension’s 4-H wheel-throwing unit gives for those forms. To measure your own clay: cut a neat block from the bag, measure its length, width, and height in centimetres, and weigh it. Grams divided by (length × width × height) is your density.
The 25% trimming allowance is our own starting guess, not a published figure. It covers the clay you trim off the foot and the thicker floors and walls most of us throw as beginners. That same unit suggests walls of about ¼ inch and floors of ⅜ to ½ inch while throwing, so thinner, more even throwing means less to trim. Lower the allowance as your pots get lighter.
Sources
- NIST Handbook 44 (2026), Appendix C: General Tables of Units of Measurement
- FDA: Guidelines for Determining Metric Equivalents of Household Measures
- Nescafé: Coffee cup guide
- Colorado State University Extension, Colorado 4-H Ceramics Unit 8: Wheel Throwing
- NYC Department of Health and Mental Hygiene: Build a Healthy Meal