Clay & Forming · Buying guide

Stoneware Clay for Beginners: Cone 5–6 Options to Compare

6 min read

Clay Manual · Research notes · Published October 20, 2026 · Updated October 25, 2026

Drawing: an open box of smooth pale stoneware clay, a tied tan bag of speckled clay and a thrown mug with throwing rings on a table.

Short answer

What stoneware clay should a beginner buy?

Buy a mid-fire stoneware that matches the cone your kiln fires, then choose between a smooth body and a grogged one. Many stoneware bodies are made for a cone 5 or cone 6 electric kiln, and all three Laguna clays below are:

  • Smooth: Laguna B-Mix 5 (WC401), cone 5, which Laguna describes as having a smooth, porcelain-like texture.
  • Speckled, in a small bag: B Mix with Speckles (WC408), 5 lb. Laguna says not to fire it past cone 5.
  • Red, with grog: Laguna Redstone (WC420), a red stoneware with medium grog for cone 5 or 6.

Ask the kiln operator which cone they fire before you buy, and try a local ceramic shop first.

We think stoneware is a better first pottery clay than porcelain for most people: porcelain is less plastic and tends to warp in the kiln.

Buy it from a local ceramic shop when you can. The shop can hand you the moist body that local kilns already fire. Amazon is the fallback if you do not have that shop. We checked the comparison listings below on 20 October 2026 and read Laguna’s own product page for each clay on 23 October 2026. We have not thrown or fired those listed clays. Our own clay is a separate note at the end.

Do not turn a cone number on a bag into a firing program. Cone 06 is not cone 5 or cone 6. Match the label to the kiln, and ask the kiln operator. Nothing here proves a pot is safe for food.

In this guide

How do the three stoneware clays compare?

Three Laguna stoneware clays drawn as two boxes and a small bag, each with its cone. Smooth: B-Mix 5 (WC401), 25 lb box, cone 5, a porcelain-like texture per Laguna. Speckled: B Mix with Speckles (WC408), 5 lb bag, cone 5, and Laguna says do not fire it past cone 5. Red, with grog: Redstone (WC420), 25 lb box, cone 5 or 6, coarser than B Mix. A note below says cone 06 is not cone 5 or cone 6, so ask the kiln operator which cone they fire before you buy.
Match the cone on the bag to your kiln first, then pick a smooth, speckled or grogged red body.
Looking for Clay Laguna’s cone Shrinkage Absorption Listing
A smooth mid-fire body Laguna cone 5 B Mix, 25 lb 5 12% 2.3% —
A smaller speckled bag Laguna B Mix with Speckles WC408, 5 lb 5 (do not fire past 5) 12.47% 2.47% —
A red mid-fire clay Laguna Redstone WC420, 25 lb 5 or 6 10.5% 0.5% —

The cone, shrinkage, and absorption columns are Laguna’s own figures from its product pages, checked on 23 October 2026. Laguna does not say which drying and firing stages its shrinkage figure covers, so treat it as a comparison between these bodies, not a number to plan a lid fit on.

1. Laguna cone 5 B Mix

The listing title is Laguna Clay cone 5 B Mix, 25 lb. Laguna sells this body as B-Mix 5, WC401, and describes a smooth, porcelain-like texture that is light gray when wet and fires to a cream color in oxidation. The Amazon title does not print the WC401 code, so check the box when it arrives.

What to expect

A 25 lb box of moist clay for throwing and handbuilding, if your kiln is in the cone 5 range this listing names. It is not a low-fire terra cotta and it is not a cone 10 porcelain.

Pros

  • The cone is in the title, which makes the kiln check easier.
  • Laguna lists throwing and handbuilding among its uses, and calls the texture smooth.

Cons

  • Twenty-five pounds is more than a first weekend needs.
  • Shipping moist clay can dry it out or damage the box. Read recent reviews for that, and prefer a local shop.

Who it’s for: a cone 5 studio that wants a familiar light stoneware and has no local supplier.

Skip it if: the kiln fires earthenware only, or it fires to cone 10 and the studio uses a different body.

2. B Mix with speckles, 5 lb

The listing is Laguna B Mix with Speckles WC408, cone 5, 5 lb.

What to expect

Laguna says WC408 has the same working properties as B-Mix WC401, and describes it as a smooth, plastic, porcelaneous stoneware that prefers slow drying and firm compression on rims and bottoms. Laguna also says not to fire it past cone 5. Five pounds is a more reasonable test than 25 lb. Laguna’s page does not describe how the speckles look after firing, so judge that from photos and a test tile.

Pros

  • Smaller weight if you are comparing before you commit.
  • The listing names both the clay code, WC408, and cone 5, which match Laguna’s page.

Cons

  • If you want a plain surface under glaze, plain B Mix is the simpler choice.
  • A cone 6 kiln is the wrong match. Laguna’s limit is cone 5.
  • A 5 lb bag still has to stay moist. Seal it.

Who it’s for: someone who wants to try a speckled mid-fire clay without a 25 lb box.

Skip it if: you need a red clay. That is the next listing.

3. Laguna Redstone WC420

The listing title is Laguna Redstone WC420, cone 5–6, 25 lb, red clay for sculpting. Laguna’s own page lists cone 5 or 6 and describes a red stoneware with medium grog and minimal porosity at cone 6 that fires a warm brick red in oxidation. One bullet on the Amazon listing says “Cone: 10”, which contradicts both its own title and Laguna. Go by Laguna’s page and the bag.

What to expect

A red stoneware for a mid-fire kiln, not a low-fire terra cotta. Laguna lists 10.5% shrinkage and 0.5% absorption. The color is in the clay, so glazes will not look the way they do on B Mix.

Pros

  • The cone range is printed in the listing title.
  • A clear red option when you want the color in the body.

Cons

  • Another 25 lb box. Ask a shop for a smaller cut of a similar red stoneware if you can.
  • The listing says “for sculpting”, but Laguna lists throwing and handbuilding as well as sculpture. The grog makes it a coarser body than B Mix.

Who it’s for: a cone 5 or cone 6 kiln and a preference for red clay.

Skip it if: you want a white ground for color. Stay with B Mix, or read porcelain once stoneware feels familiar.

Is stoneware the right family for your kiln?

If your studio fires to cone 5 or cone 6, we think stoneware is the practical first kiln clay. If it fires low, the earthenware guide is the alternative. Not sure which family you need? Start with how to choose pottery clay.

The clay we have been using

At home we have been using SIO-2 PRAI, a white high-temperature clay. It came highly recommended, and so far it has worked well for us. We have used it since this journey started and have gone through about two 27.6 lb bags, roughly 55 lb.

We fire it at about 1250°C (2282°F). SIO-2 sells PRAI as a plastic white body with 40% very fine grog and lists a recommended firing range of 1240–1300°C, with a 1000°C bisque. That is the manufacturer’s page, checked on 20 October 2026 and again on 23 October 2026.

We stocked up on Mayco Stoneware glazes for the same firing. Mayco’s own pages show these glazes on test tiles at cone 6 in oxidation and cone 10 in reduction, not at our exact temperature, so we treat their chips as a guide rather than a promise:

  • Stoned Denim.
  • Blue Splatterware.
  • Black Matte.
  • Green Tea, which we use as our crackle glaze. Mayco itself describes it as a variegated sage green that breaks over texture.
  • Pink Pearl, which Mayco describes as a glossy, semi-opaque white that breaks over texture.

Sources (12)

: Laguna Clay & Glaze Co, SIO-2 (Cerámica Collet), Mayco and more
  • WC401 B-Mix ^5 moist clay, boxed — Laguna Clay & Glaze Co. Product description and specification list below the title. Supports: On that date Laguna listed WC401 B-Mix as a cone 5 moist clay with a smooth, porcelain texture that fires to a cream color in oxidation, with shrinkage 12% and water absorption 2.3%. The page did not use the word stoneware, and its tableware application wording is a manufacturer claim, not a leaching result.
  • WC408 B-Mix ^5 with speckles moist clay, boxed — Laguna Clay & Glaze Co. Product description, firing warning, and specification block. Supports: Laguna says WC408 has the same working properties as B-Mix WC401 and describes it as a mid-temperature, smooth, porcelaneous stoneware that prefers slow drying and compression on rims and bottoms. The page warns not to fire past cone 5 and lists cone 5, 12.47% shrinkage, 2.47% water absorption, and COE 7.07. It does not describe what the speckles look like after firing.
  • WC420 Redstone ^5 moist clay, boxed — Laguna Clay & Glaze Co. Product description and specification block. Supports: Laguna describes Redstone as a red stoneware with medium grog and minimal porosity at cone 6, for handbuilding and throwing small to medium pieces, firing warm brick red in oxidation. It lists cone 5 or 6, red wet color, 10.5% shrinkage, 0.5% water absorption, COE 5.52, and applications that include sculpture, throwing, handbuilding, and tableware.
  • SIO-2 PRAI refractaria blanca 0-0.2 mm — SIO-2 (Cerámica Collet). Descripción and technical values (Spanish-language manufacturer page). Supports: SIO-2 describes PRAI as a white refractory body with 40% impalpable 0-0.2 mm grog, ivory-white after firing, sold as plastic (extruded) clay for throwing and modeling. It lists a recommended firing temperature of 1240-1300 °C, a bisque temperature of 1000 °C, and values measured at 1300 °C. The page also makes a food-safe claim under ISO 6486; that is the maker's claim, not a test of any particular pot.
  • SW-101 Stoned Denim — Mayco. Fired descriptions and test-tile captions. Supports: Mayco shows Stoned Denim, a Stoneware glaze, on tiles at cone 5 and cone 6 oxidation and cone 10 reduction, and describes it as a variegated blue that breaks brown, darkening at cone 10.
  • SW-152 Blue Splatterware — Mayco. Fired descriptions and test-tile captions. Supports: Mayco shows Blue Splatterware, a Stoneware crystal glaze, at cone 5 and cone 6 oxidation and at cone 10, describing a white semi-matte glaze with blue crystals that become less defined at cone 10.
  • SW-140 Black Matte — Mayco. Fired descriptions and tip. Supports: Mayco shows Black Matte, a Stoneware matte glaze, at cone 6 oxidation and cone 10 reduction, and calls it a true matte finish at cone 5/6 with no movement. Chips are shown on a white clay body.
  • SW-108 Green Tea — Mayco. Fired descriptions and chip note. Supports: Mayco shows Green Tea, a Stoneware glaze, at cone 6 oxidation and cone 10 reduction, on a white clay body. It describes a variegated sage green at cone 6 that shifts to pink, blue, and green at cone 10.
  • SW-226 Pink Pearl — Mayco. Fired descriptions and tile labels. Supports: Mayco describes Pink Pearl, a Stoneware glaze, as a glossy, semi-opaque white that breaks over texture at cone 6, changing to a glossy blue at cone 10. Its tiles are shown at cone 5 and cone 6 oxidation and cone 10 reduction.
  • Stoneware — Digitalfire, Tony Hansen. Glossary definition. Supports: Hansen describes stoneware, for potters, as high-temperature non-white bodies fired dense enough for durable ware, and he warns against identifying it by a single chemistry formula. He discusses bodies across a range that includes cone 6, so stoneware is not one cone number.
  • Porcelain — Digitalfire, Tony Hansen. Opening definition and the plasticity and warping paragraphs. Supports: Hansen describes traditional utilitarian porcelains as comparatively white-burning vitreous bodies normally made from feldspar, clay, and quartz, which can be translucent when impurities are low and vitrification is sufficient. He writes that plastic porcelains have traditionally been much shorter (less plastic) than stoneware or earthenware, and that porcelains tend to warp during firing because they are taken closer to the melting point. He also discusses lower-temperature variants, so porcelain is not one temperature.
  • Pyrometric Cones FAQ — The Edward Orton Jr. Ceramic Foundation. Why cones are numbered from 022 to 42, and the cone 06 example. Supports: The zero series uses a leading zero instead of a minus sign. Cone 022 is the lowest of that series and cone 01 is the hottest of it. Orton’s FAQ gives self-supporting cone 06 and large cone 06 fast-fire chart readings as different from each other and from cone 6.