Clay & Forming · How-to
How to Choose Pottery Clay for Beginners, by Kiln and Cone
4 min read
Short answer
How should a beginner choose pottery clay?
Choose by the kiln that will fire it, not by the catalog. No kiln: use air-dry clay, which hardens without firing and is not pottery. A low-fire kiln or class: earthenware. A studio or electric kiln firing around cone 5 to cone 6: stoneware, usually fired around cone 6, which Tony Hansen calls middle temperature and the range where most hobby stonewares are fired. Porcelain comes later. Then ask whoever fires your work which exact body they accept, and buy that one, ideally from a local shop.
This page is the decision, not a ranking. We have not fired the clays named here and we are not picking a favorite. For specific bags to compare, the family guides below hold the listings.
In this guide
- Start with the kiln, not the catalog
- Match your situation to a clay family
- Read the cone on the label
- Why the local shop wins
- What Amazon is for
Start with the kiln, not the catalog
If the piece has to be real pottery, the clay has to match a kiln. That is the whole decision. Write down the cone your class, studio, or local shop actually fires, and shop for a clay whose label matches that cone.
This page is not a firing schedule, and a clay name is not proof that a finished pot is safe for food.
Match your situation to a clay family
| Your situation | Clay family to look at | Read next |
|---|---|---|
| No kiln, practicing at the table | Air-dry clay. FILA, for example, describes DAS as hardening on exposure to air without baking. It is a different material from kiln clay. | Air-dry clay |
| A low-fire kiln, or a class that uses earthenware | Earthenware. Hansen describes it as low-temperature ware, often discussed around cone 010 to cone 04, and typically porous. | Earthenware |
| A studio or electric kiln firing cone 5 or cone 6 | Mid-fire stoneware. Hansen calls cone 6 “middle temperature” and says it is where most hobby and pottery stonewares and porcelains are fired, and the range most potters with electric kilns work in. | Stoneware |
| You already like stoneware and want a white body | Porcelain, at the cone your kiln fires. It is the less forgiving choice. | Porcelain |
| You are not sure what the kiln fires | Nothing yet. Ask first. | Clay families explained |
Hansen’s descriptions are a technician’s account, not a count of studios. He also says stoneware is not one cone number. Your studio’s answer still beats the table.
Read the cone on the label
A clay bag or product page states a firing range. Two manufacturer pages we checked on 23 October 2026 show how much the numbers differ:
- AMACO describes White Art Clay No. 25 as a low fire clay with a firing range from Cone 04 to Cone 3, and lists 13.7% absorption at Cone 04.
- Laguna lists WC401 B-Mix as a cone 5 clay, with 2.3% water absorption.
Those figures are each manufacturer’s own, for that body only. They show why the family name is not enough, and they are not food-contact results.
Cone 04 and cone 4 are different numbers. So are cone 06 and cone 6. Orton’s FAQ explains that the leading zero stands in for a minus sign in the lower series. Dropping it is how people buy the wrong clay.
Why the local shop wins
Moist pottery clay is heavy, and it can dry out or freeze on a long trip. A local shop will also tell you which bodies their customers fire in nearby kilns. That conversation is worth more than a product photo.
Ask for:
- The clay name and the cone range.
- Whether it is sold moist and ready to use.
- Whether they recommend it for the wheel, for handbuilding, or for both.
- How they want you to store the bag.
If the shop is out of the body your kiln uses, ask them for the closest substitute. Do not guess from the color of the clay.
What Amazon is for
Amazon is the fallback when you cannot get to a ceramic shop. The family guides link to specific listings we opened on 20 October 2026. Check the cone, the weight, and whether the clay is moist before you order. A 25 lb box is a lot of clay for a first week. Our vessel calculator shows how much clay a mug or bowl takes. If you start selling pieces, our pricing calculator counts the clay alongside glaze, firing, time, and overhead.
Those guides include the affiliate disclosure. This page does not link to a product, because the better first purchase is the one your local shop and your kiln agree on.
Sources (7)
: Digitalfire, Tony Hansen, The Edward Orton Jr. Ceramic Foundation, AMACO and more
- Cone 6 — Digitalfire, Tony Hansen. Opening glossary definition. Supports: Hansen says potters also call cone 6 (about 2200F/1200C) "middle temperature", that it is the range at which most hobby and pottery stonewares and porcelains are fired, and that it is the medium-temperature oxidation range most potters work in using electric kilns. He gives no survey figure, so this is a technician's characterization, not a count of studios.
- Earthenware — Digitalfire, Tony Hansen. Glossary definition. Supports: Hansen describes earthenware as low-temperature ware, often discussed around cone 010 to cone 04, that lacks the glass development of stoneware and is typically porous. He also notes some terra-cotta bodies can densify if fired hotter, so the family name is not a maturity guarantee.
- Stoneware — Digitalfire, Tony Hansen. Glossary definition. Supports: Hansen describes stoneware, for potters, as high-temperature non-white bodies fired dense enough for durable ware, and he warns against identifying it by a single chemistry formula. He discusses bodies across a range that includes cone 6, so stoneware is not one cone number.
- Pyrometric Cones FAQ — The Edward Orton Jr. Ceramic Foundation. Why cones are numbered from 022 to 42, and the cone 06 example. Supports: The zero series uses a leading zero instead of a minus sign. Cone 022 is the lowest of that series and cone 01 is the hottest of it. Orton’s FAQ gives self-supporting cone 06 and large cone 06 fast-fire chart readings as different from each other and from cone 6.
- White Art Clay No.25 — AMACO. Product Description. Supports: On that date AMACO described White Art Clay No. 25 as an extremely plastic low fire clay for wheelthrowing, handbuilding, and modeling, with a firing range from Cone 04 to Cone 3, AMACO glazes maturing at Cone 05 recommended for decoration, shrinkage of 6.3% at Cone 04, and absorption of 13.7% at Cone 04.
- WC401 B-Mix ^5 moist clay, boxed — Laguna Clay & Glaze Co. Product description and specification list below the title. Supports: On that date Laguna listed WC401 B-Mix as a cone 5 moist clay with a smooth, porcelain texture that fires to a cream color in oxidation, with shrinkage 12% and water absorption 2.3%. The page did not use the word stoneware, and its tableware application wording is a manufacturer claim, not a leaching result.
- DAS modelling clay — F.I.L.A. (DAS). Product description paragraph. Supports: FILA describes DAS as a modelling clay that hardens on exposure to air without any need for baking. The page is the manufacturer's description of one air-dry clay, not a statement about water resistance or food contact.