Clay & Forming · Buying guide
Earthenware Clay for Beginners: AMACO No. 25 and a Red Clay
4 min read
Short answer
Which earthenware clay should a beginner buy?
Buy the low-fire body your kiln already fires. Earthenware is the low-fire side of pottery clay: Tony Hansen’s Digitalfire glossary places it at about cone 010 to cone 04 and calls it porous. Of the two AMACO listings below:
- White Art No. 25 is the low-fire choice. AMACO says it fires off-white and lists cone 04 to cone 3. The listing is a 25 lb block.
- Terra Cotta No. 77 is the red choice, in a 50 lb box. It is sold as low-fire earthenware, but AMACO names it Terra Cotta Stoneware Clay, files it with its mid/high-fire clays and gives its figures at cone 5.
Confirm the cone with the person who runs the kiln, and check a local ceramic shop first.
Buy it at a local ceramic shop if you have one. Moist clay ships poorly, and the shop can match a bag to local kilns. If there is no shop nearby, the Amazon listings below are the fallback we checked on 20 October 2026. On 23 October 2026 we read AMACO’s own page for each clay. We have not used these clays.
This is not a firing schedule. Cone 06 and cone 6 are different. Read the cone on the listing and on the bag, and confirm it with the person who runs the kiln. A clay name does not prove the finished pot is safe for food.
In this guide
- How do the two earthenware clays compare?
- AMACO White Art No. 25
- AMACO Terra Cotta No. 77
- Is earthenware the right family for your kiln?
How do the two earthenware clays compare?
| Looking for | Clay | AMACO’s figures | Listing |
|---|---|---|---|
| A white low-fire body | AMACO White Art No. 25, 25 lb | Cone 04 to cone 3; 6.3% shrinkage and 13.7% absorption at cone 04 | — |
| A red, wide-range terra cotta | AMACO Terra Cotta No. 77, moist, 50 lb | Full range not stated in the text; 10.5% shrinkage and 0.9% absorption at cone 5 | — |
The figures column is from AMACO’s product pages, checked on 23 October 2026.
1. AMACO White Art No. 25
The listing title is Amaco Low Fire Clay, White Art No. 25, 25 lb. That is a large moist block, not a sample. AMACO describes it as an extremely plastic low-fire clay for wheelthrowing, handbuilding, and modeling, and recommends its glazes that mature at cone 05.
What to expect
AMACO says it fires off-white and lists a firing range from cone 04 to cone 3. That off-white ground is useful when you care about the color of slips and glazes. At cone 04 AMACO lists 13.7% absorption, which is what porous earthenware looks like on paper. Twenty-five pounds is a serious first purchase. Ask the kiln whether this low-fire body is accepted before it arrives.
Pros
- Sold specifically as low-fire clay, firing off-white, with a published cone range.
- One body you can use for more than a single test tile, if the kiln matches.
Cons
- Heavy to ship, and a lot of clay if you are still deciding.
- The listing title does not replace the cone printed on the bag you receive.
Who it’s for: someone whose kiln or class already uses low-fire white clay, and who cannot buy it locally.
Skip it if: your studio fires to cone 5 or cone 6. Read stoneware instead.
Customer reviews on the Amazon page are worth reading for shipping damage and dryness. We did not copy scores or quotes, because those change.
2. AMACO Terra Cotta No. 77
The listing title is Amaco Low Fire Terra Cotta 77 earthenware clay, moist, 50 lb. AMACO’s own page names the same clay differently: Terra Cotta Stoneware Clay No. 77, filed under its mid/high-fire clays. AMACO describes a red clay with grog for a wide firing range, including large raku pieces, and gives its shrinkage (10.5%) and absorption (0.9%) at cone 5. The Amazon listing says it fires from cone 06 to cone 5.
What to expect
This is the red-clay option, and the box is twice the weight of the white 25 lb listing. It is not a strictly low-fire body. Because AMACO publishes its numbers at cone 5, it can suit a low-fire or a cone 5 studio, but the result will be different at each, so ask the kiln operator which cone they will fire it to. AMACO does not publish its shrinkage or absorption at a low-fire cone.
Pros
- Moist and ready to use, with a firing range wide enough to cover low fire and cone 5, according to the listing.
- A distinct red body, so you are not guessing from a white clay photo.
Cons
- Fifty pounds is a lot to store, and a costly mistake if the cone is wrong.
- The Amazon title and AMACO’s own page disagree on whether to call it earthenware or stoneware. Go by the cone, not the name.
- Red clay changes how glazes look. Do not expect the same results as on white clay.
Who it’s for: a low-fire or cone 5 studio that wants a red body and has room for a 50 lb box.
Skip it if: you are making a first small test. Ask a local shop for a smaller bag of the same kind of clay.
Is earthenware the right family for your kiln?
Earthenware stays porous after a normal low fire. That is a reason to enjoy it for sculpture and planters, and a reason not to assume a cup is suitable for food. If your kiln fires to cone 5 or 6, or you want a denser clay, move to the stoneware guide. Not sure which family you need? Start with how to choose pottery clay.
Sources (4)
: AMACO (American Art Clay Co.), Digitalfire, Tony Hansen, The Edward Orton Jr. Ceramic Foundation
- White Art Clay No. 25 — AMACO (American Art Clay Co.). Product description. Supports: AMACO describes White Art Clay as an extremely plastic low-fire clay for wheelthrowing, handbuilding, and modeling. It fires off-white, has a firing range from cone 04 to cone 3, recommends AMACO glazes maturing at cone 05, and lists shrinkage of 6.3% and absorption of 13.7% at cone 04. Sizes offered are 25 lb and 50 lb.
- Terra Cotta Stoneware Clay No. 77 — AMACO (American Art Clay Co.). Product title, category, and description. Supports: AMACO names No. 77 a Terra Cotta Stoneware Clay and lists it under mid/high-fire clays. It describes a red clay with grog for a wide firing range, including large raku pieces, that fires terra cotta colored bisque, and it gives shrinkage of 10.5% and absorption of 0.9% at cone 5. The text does not state a full cone range. Size offered is 50 lb.
- Earthenware — Digitalfire, Tony Hansen. Glossary definition. Supports: Hansen describes earthenware as low-temperature ware, often discussed around cone 010 to cone 04, that lacks the glass development of stoneware and is typically porous. He also notes some terra-cotta bodies can densify if fired hotter, so the family name is not a maturity guarantee.
- Pyrometric Cones FAQ — The Edward Orton Jr. Ceramic Foundation. Why cones are numbered from 022 to 42, and the cone 06 example. Supports: The zero series uses a leading zero instead of a minus sign. Cone 022 is the lowest of that series and cone 01 is the hottest of it. Orton’s FAQ gives self-supporting cone 06 and large cone 06 fast-fire chart readings as different from each other and from cone 6.