Clay & Forming · Foundation
Reading a Clay Product Sheet Without Getting Lost
4 min read
A clay product page can give you a lot of numbers before you know what to do with any of them. We are breaking down one example to make the vocabulary easier to follow.
This is research, not a review of clay we have used. The example comes from the manufacturer information recorded in our source notes; check the current page and ask your studio before buying.
Short answer
What can a product sheet tell me?
It tells you the words and numbers the manufacturer chose to publish for that product on the day you read it. It does not fire your kiln, test your pot for food, or measure the shrinkage of the bag in your studio. Read each field as a claim with a job, and notice the jobs the page leaves undone.
The example below is Laguna Clay’s public page for WC429 RSMC Special, read on 17 October 2026. It is one stoneware body, not a definition of all clay. The link at the end of this section is the ordinary manufacturer page. This site is not in Laguna’s affiliate program, and the price that was on the page that day is not repeated here.
Working through the label
The caret in the page title, written by Laguna as a mark before 5-6, matches the sentence “Cone: 5 to 6” on the same page. Read the words. A caret is not a decimal, and it is not a leading zero. Cone 06 is a different Orton designation from cone 6. Orton’s FAQ explains that the zero was used instead of a minus sign, and that cone 01 is the hot end of the zero series while cone 022 is the cool end. Dropping the zero changes the cone.
| Question | What the page listed | What that does not tell us |
|---|---|---|
| Cone 5 to 6 | A manufacturer firing range for this body. | Not cone 05 or cone 06. Not a schedule, a heating rate, or a hold time. |
| Shrinkage 12% | A shrinkage figure without a stage named on the page we read. | Not your studio’s measurement, and not a useful planning figure until the stage is known. |
| Water absorption 0.5% | A separate reported property. | Not shrinkage. Not a food-safety test. Not a volume change. |
| COE 4.6 | A coefficient the manufacturer printed. | Not a glaze-fit verdict. This guide does not calculate fit from that number. |
| Penetrometer 6pt | A firmness figure on the page. | The page we read did not define the scale. Do not guess what 6 means. |
| Tableware and ovenware in the application list | Uses the manufacturer chose to name. | Not a leaching test, and not proof the finished pot is suitable for food in your jurisdiction. |
| Minimum order stated as 50 lb | A purchasing condition visible that day. Confirm it before you buy. | Not a recommendation that a beginner needs 50 lb. |
Claims, tests, and your own bar
Three layers get confused on a sales page:
- Manufacturer claim. The words and numbers above. Useful, and limited to what the page actually says.
- A test this site did not run. We did not shrink a bar of WC429, fire it, or send a pot to a lab. This is a source-based example, not hands-on testing.
- Your measurement. Two lengths, a unit, and a named stage in your log. That percentage belongs to those conditions. Keep absorption separate from shrinkage when doing the arithmetic.
If you need a family-level comparison of earthenware, stoneware, and porcelain, use the comparison guide. It does not turn WC429’s application list into a food-contact conclusion.
Before you change studios or clay
Write the product name into the log exactly. If the next bag’s sheet uses a different shrinkage stage, do not average it with the old percentage. Ask the manufacturer when the sheet is silent. If the information is missing, it is worth asking rather than guessing.
What we are taking from this
A product sheet helps us ask better questions. It does not replace a studio conversation, a measurement, or specialist advice.
Sources (2)
: Laguna Clay & Glaze Co, The Edward Orton Jr. Ceramic Foundation
- WC429 RSMC Special ^5-6 moist clay, boxed — Laguna Clay & Glaze Co. Product specification block. Supports: On that date the page described WC429 as a cone 5 to 6 red stoneware, listed shrinkage 12%, water absorption 0.5%, COE 4.6, and a penetrometer value, and included tableware among applications. It did not define which shrinkage stages the 12% covers.
- Pyrometric Cones FAQ — The Edward Orton Jr. Ceramic Foundation. Why cones are numbered from 022 to 42, and the cone 06 example. Supports: The zero series uses a leading zero instead of a minus sign. Cone 022 is the lowest of that series and cone 01 is the hottest of it. Orton’s FAQ gives self-supporting cone 06 and large cone 06 fast-fire chart readings as different from each other and from cone 6.