Clay & Forming · Buying guide
Porcelain Clay for Beginners: Cone 6 and Cone 10 Options
4 min read
Short answer
Should a beginner start with porcelain clay?
Usually not. Start with stoneware. Tony Hansen describes traditional porcelains as white-burning, vitreous bodies that are less plastic than stoneware and tend to warp in the kiln. That makes porcelain a poor first clay if you are still learning to center on the wheel. If you want a smooth body in the meantime, Laguna describes B-Mix 5 (WC401), the first clay in our stoneware guide, as having a smooth, porcelain-like texture. When you are ready, match the porcelain to your kiln’s cone:
- Cone 6 kiln: Laguna Frost (WC437), which Laguna sells as a white, translucent throwing porcelain for cone 5–6.
- Cone 10 kiln: Laguna Dave’s Porcelain (WC384), a cone 10 throwing body.
Porcelain is the white, less forgiving end of kiln clay. It is a reasonable next clay when you already like stoneware and your kiln matches the cone on the bag.
A local ceramic shop is the better place to buy it. They can tell you whether people nearby fire a cone 6 porcelain or a cone 10 porcelain. Those are not interchangeable. Amazon is the fallback, and only after that conversation. We checked the listings below on 20 October 2026, re-checked them on 23 October 2026, and read Laguna’s own product page for each clay that day. We have not used the clay.
This page does not tell you how to fire a kiln. Cone 6 and cone 10 are different designations, and cone 06 is a different number again. A porcelain label is not proof that a pot is safe for food.
In this guide
- How do the two porcelain clays compare?
- Frost porcelain, cone 6
- Dave’s porcelain, cone 10
- What should you use before porcelain?
How do the two porcelain clays compare?
| Looking for | Clay | Laguna’s cone | Shrinkage | Absorption | Fired color (Laguna) | Listing |
|---|---|---|---|---|---|---|
| A cone 6 white porcelain | Laguna Frost WC437, 25 lb on the listing | 6 (described as for cone 5–6) | 11% | 0.5% | White, translucent | — |
| A cone 10 porcelain | Laguna Dave’s Porcelain WC384, 10 lb | 10 | 13% | 0.5% | Light gray in reduction, off-white in oxidation | — |
The cone, shrinkage, absorption, and color columns are Laguna’s own figures, checked on 23 October 2026. Laguna does not say which stages its shrinkage covers.
1. Laguna Frost WC437
When we re-checked on 23 October 2026, this link opened the 25 lb option: Frost Porcelain WC437, cone 6, Laguna Clay, 25 lb. On 20 October we had noted 10 lb, so check the size before you buy. Laguna describes Frost as an exceptionally white and translucent throwing porcelain for cone 5–6, and its specification line says cone 6.
What to expect
This is the listing to compare if the kiln is a cone 6 kiln, the same range as the stoneware bodies in the stoneware guide. At 25 lb it is the same size as the stoneware boxes, so it is no longer a small test. Porcelain still warps more readily in the kiln than stoneware, Hansen notes.
Pros
- The listing title includes cone 6, so you can match it to a mid-fire kiln.
- Laguna lists throwing and handbuilding small to medium pieces among its uses.
Cons
- Porcelain is less forgiving than B Mix. Do not make this your first bag on the wheel.
- Twenty-five pounds of a clay you are only trying is a lot. Ask a shop whether they sell a smaller cut.
- Moist porcelain still suffers in shipping. Read recent reviews for dry or frozen boxes.
Who it’s for: someone who already works in a cone 6 kiln and wants a white porcelain to compare with stoneware.
Skip it if: you have not made basic cylinders yet. Stay with stoneware until the forms are familiar.
2. Dave’s Porcelain WC384
The listing is Dave’s Porcelain WC384, cone 10, Laguna Clay, 10 lb. Laguna describes it as a throwing body for thin walls and larger pieces, and for slab work when a vitreous clay is wanted. It fires light gray in reduction and off-white in oxidation.
What to expect
Cone 10 is not cone 6. If your electric kiln stops at cone 6, this is the wrong bag. It belongs with a kiln that is set up for cone 10 clay. The listing is still only 10 lb, which is the right size for a test, not for a production run.
Pros
- The cone is in the title, which prevents the most common mix-up if you actually read it.
- A 10 lb box limits the loss if the kiln does not match.
Cons
- Useless in a cone 6-only kiln.
- High-fire porcelain is a technical clay. We would expect a beginner to lose more pieces than with stoneware.
Who it’s for: a cone 10 kiln, and a potter who already has a reason to work in porcelain.
Skip it if: you are not sure what cone your kiln reaches. Ask before you buy either listing.
What should you use before porcelain?
Porcelain rewards even walls and patience. It is the wrong place to learn those habits. Start with stoneware or, if you have no kiln, with air-dry clay. Not sure which family you need? Start with how to choose pottery clay. When you do buy porcelain, let the local shop pick the body that their kilns already fire.
Sources (5)
: Laguna Clay & Glaze Co, Digitalfire, Tony Hansen, The Edward Orton Jr. Ceramic Foundation
- WC437 Frost porcelain moist clay, boxed — Laguna Clay & Glaze Co. Product description and specification block. Supports: Laguna describes Frost as an exceptionally white and translucent throwing porcelain for cone 5-6. The specification block lists cone 6, white wet color, 11% shrinkage, 0.5% water absorption, and COE 7.14, with applications that include throwing and handbuilding small to medium pieces and tableware.
- WC384 Dave's Porcelain ^10 moist clay, boxed — Laguna Clay & Glaze Co. Product description and specification block. Supports: Laguna describes Dave's Porcelain as a throwing body for thin walls and larger pieces, and for slab use when a vitreous clay is wanted. It fires light gray in reduction and off-white in oxidation. The page lists cone 10, white wet color, 13% shrinkage, 0.5% water absorption, and COE 5.83.
- WC401 B-Mix ^5 moist clay, boxed — Laguna Clay & Glaze Co. Product description and specification list below the title. Supports: On that date Laguna listed WC401 B-Mix as a cone 5 moist clay with a smooth, porcelain texture that fires to a cream color in oxidation, with shrinkage 12% and water absorption 2.3%. The page did not use the word stoneware, and its tableware application wording is a manufacturer claim, not a leaching result.
- Porcelain — Digitalfire, Tony Hansen. Opening definition and the plasticity and warping paragraphs. Supports: Hansen describes traditional utilitarian porcelains as comparatively white-burning vitreous bodies normally made from feldspar, clay, and quartz, which can be translucent when impurities are low and vitrification is sufficient. He writes that plastic porcelains have traditionally been much shorter (less plastic) than stoneware or earthenware, and that porcelains tend to warp during firing because they are taken closer to the melting point. He also discusses lower-temperature variants, so porcelain is not one temperature.
- Pyrometric Cones FAQ — The Edward Orton Jr. Ceramic Foundation. Why cones are numbered from 022 to 42, and the cone 06 example. Supports: The zero series uses a leading zero instead of a minus sign. Cone 022 is the lowest of that series and cone 01 is the hottest of it. Orton’s FAQ gives self-supporting cone 06 and large cone 06 fast-fire chart readings as different from each other and from cone 6.