Beginner Ceramics · How-to

Keeping a Pottery Journal: The Details Worth Writing Down

3 min read

Clay Manual · Research notes · Published October 19, 2026 · Updated October 26, 2026

Drawing: an open spiral notebook with blank ruled lines and a pencil lying across it, beside a small clay cylinder.

Part of the appeal of ceramics for us is getting better over time. For me, that includes eventually making sets for our home. That makes keeping track of materials and results an interesting part of the process—not just extra paperwork.

These are our research notes on what a useful pottery journal could include. We are not presenting a completed studio experiment or claiming that we already record every field.

Short answer

What belongs in the log?

Record the clay and batch, the lengths you measured, the stage those lengths belong to, the glaze you applied, the kiln and controller, the firing or cone the studio actually recorded, the date, and what you saw. Leave a field blank rather than invent it.

A finished pot does not remember its own history. If a rim cracks or a glaze looks unlike the label photo, the useful question is what differed: the clay lot, the drying setup, the thickness, or the firing the studio logged. You can only answer that if you wrote it down at the time.

What we would put in the notebook

The printable log uses one row, or one sheet, per piece or per test bar. These are the fields, and why each one is there.

A drawn notebook page with eight fields, each with a blank line: date, material and batch, lengths and unit, stage, glaze and application, kiln and controller, recorded firing or cone, and observations. A margin note points to the cone line: a blank field is better than a guess; if nobody recorded a cone, leave the line blank, because cone 06 and cone 6 are different.
The eight fields of the log, with the cone line left blank when nobody recorded it.
  1. Date

    The day you measured or the day the piece came out of the kiln. If you are unsure of the date, mark it as uncertain.

  2. Material and batch

    The clay’s trade name, the maker, and any lot mark on the bag. Two bags with the same name can still differ. If the studio does not know the lot, write that.

  3. Initial length, final length, and unit

    Keep the unit next to both numbers. Millimetres, centimetres, and inches are all fine if you do not mix them in one calculation.

  4. Stage

    Wet to dry, dry to fired, wet to fired, or a short name you define. A percentage without a stage cannot be reused safely. Absorption on a product sheet is not this field.

  5. Glaze product and application

    The product name and whether you brushed, dipped, or poured, if you did any of those. Do not write a recipe you did not use.

  6. Kiln model and controller

    The nameplate on that kiln. Manuals are written for a model and a controller. A different kiln in the same room is a different record.

  7. Recorded firing or cone

    Copy what the studio wrote, including a leading zero. Cone 06 and cone 6 are different designations. If nobody recorded a cone, leave the line blank.

  8. Observations

    Where a crack started, whether the rim dried first, or whether the glaze looked unlike the label. Keep what you observed separate from what you think caused it.

If you sell your work later, the clay, glaze, and firing in this log are also cost lines in our pricing calculator, which adds your time and overhead and shows the price that covers them.

A blank field is better than a guess

If a cone entry is missing, ask the studio rather than copying a schedule from a book or another clay’s bag. Laguna’s WC429 page, for example, lists a cone range and a shrinkage figure for that product. Those numbers describe the manufacturer’s sheet. They are not a firing you can paste into your log, and the sheet does not say which shrinkage stages the percentage covers. Read that limitation in the product-sheet guide.

Download the blank process log Print it or save it as a PDF. The on-site page has the same fields.

An arithmetic example that is not a test

If you later measure 100 mm and then 88 mm, the calculation 100 × (100 − 88) / 100 gives 12% for that stage. You may write those lengths in a practice row labeled “arithmetic example.” Do not attach a clay name or a cone to that row. We have not fired a test bar to produce these numbers.

Easy details to mix up

  • Filling every box because empty boxes look unfinished.
  • Writing “cone 6” when the bag said cone 06, or the other way around.
  • Recording the manufacturer’s absorption number in the shrinkage column.
  • Updating the date on an old row without adding what changed.

When a measurement is real, use how to measure shrinkage so the two lengths and the stage stay attached to each other.

What we are taking from this

The aim is a useful record, not a perfect notebook. Start with what you know, keep observations separate from guesses, and ask the studio about missing firing details.

Sources (1)

: Laguna Clay & Glaze Co
  • WC429 RSMC Special ^5-6 moist clay, boxed — Laguna Clay & Glaze Co. Product specification block. Supports: On that date the page described WC429 as a cone 5 to 6 red stoneware, listed shrinkage 12%, water absorption 0.5%, COE 4.6, and a penetrometer value, and included tableware among applications. It did not define which shrinkage stages the 12% covers.